|
|
|
|
|
|
|
MULTICAM® COATINGS | |
|||
|
 Now you can have your personal items or your company’s products coated with MultiCam® hydrographic film. It’s the same water-transfer process routinely used on shotgun and ATV’s. Crye Precision does not coat items. Instead independent coaters use our MulitCam® film on your products. We recommend Lakota Industries as a good place to start. They have done excellent work for many of our customers. www.lakota-industries.com POC: Dick Williamson, Dick@lakota-industries.com Contact us at sales@multicampattern.com if you need help locating a specific coater. |
|
|||
|
|||||
|
MULTICAM® FABRICS All fabrics are made in the USA. Available for sale at cryeprecision.com | |
|||
|
|||||
|
 |
|
330 Denier Cordura® is the lightest Cordura® fabric we offer. It's strong, abrasion resistant, and ideal for applications where you want to reduce weight. This material is urethane coated on the back for water repellency. Specs: Finished Width- 60 inches • Finished Weight- 6 oz/yd2 • Fiber Content- 100% nylon • Construction- 60/40 (warp/fill) • Breaking strength- 200/155(warp/fill) (lbs, minimum) • Typical Roll Length- 50 yds |
|
|
|
|||||
|
 |
|
500Denier Cordura® is a mid-weight fabric ideal for load carriage items that need to be light yet durable. For comparison, USMC OTVs are made from 500denier Cordura®. 500denier is strong and abrasion resistant. This material is urethane coated on the back for water repellency. |
|
|
|
|||||
|
 |
|
725 Denier Cordura® strikes a good balance between 1000denier and 500denier for durability and weight. This material is urethane coated on the back for water repellency. Specs: Finished Width- 60 inches • Finished Weight- 9-10 oz/yd2 • Fiber Content- 100% nylon • Construction- 41/36 (warp/fill) • Breaking strength- 450/280 (warp/fill) (lbs) • Typical Roll Length- 50 yds |
|
|
|
|||||
|
 |
|
1000 Denier Cordura® is the heaviest fabric we offer. It's great for packs and pouches and other applications where heavy wear is the norm. This material is urethane coated on the back for water repellency. Specs: Finished Width- 60 inches • Finished Weight- 11-12 oz/yd2 • Fiber Content- 100% nylon • Construction- 35/28 (warp/fill) • Breaking strength- 500/300 (warp/fill) (lbs) • Typical Roll Length- 50 yds |
|
|
|
|||||
|
 |
|
NYCO Ripstop is Mil-Spec 50/50 nylon/cotton blend. It’s light, strong, and comfortable. The standard of our Armed Forces. Specs: Finished Width- 64 inches • Finished Weight- 6-7oz/yd2 • Fiber Content- 50% nylon 50% cotton • Construction- 104/52(warp/fill) • Breaking strength- 200/90(warp/fill) (lbs, minimum) • Typical Roll Length- 100 yds |
|
|
|
|||||
|
 |
|
NYCO Lightweight Twill is the Mil Spec 50/50 nylon/cotton twill used in the blouse portion of the Marine Corps BDU. It is comfortable, durable, attractive, and light. Sold by the Yard. Specs: Finished Width- 60 inches • Finished Weight- 6-6.6 oz/yd2 • Fiber Content- 50% nylon 50% cotton • Construction- 95/60 (warp/fill) • Breaking strength- 170/115(warp/fill) (lbs) • Typical Roll Length- 100 yds |
|
|
|
|||||
|
|
|
NYCO Heavyweight Twill is the Mil Spec 50/50 nylon/cotton twill used in the trouser portion of the Marine Corps BDU. It is slightly heavier and more durable than our Light Weight Twill, but is visually indistinguishable. Specs: Finished Width- 60 inches • Finished Weight- 7 oz/yd2 • Fiber Content- 50% nylon 50% cotton • Construction- 86/54 (warp/fill) • Breaking strength- 200/125(warp/fill) (lbs) • Typical Roll Length- 100 yds |
|
|
|
|||||
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|